TNF experimental area |
![](/sites/default/files/user-3035/mounting_plate_TNF.jpg) | ![](/sites/default/files/user-3035/plate_lowered_TNF.jpg) | ![](/sites/default/files/user-3035/plate_channel_TNF.jpg) |
Mounting plate and hand winch lowering system | View of the mounting plate being lowered into the access channel | View of the plate going down into the access channel |
![](/sites/default/files/user-3035/neutron_dosimetry_TNF.JPG) | ![](/sites/default/files/user-3035/proton_dosimetry_TNF.jpg) | |
Neutron dosimetry rack | Cyclotron and beam information panel | |
Proton Irradiation experimental area |
Overview of beam room and general beamline arrangements |
![](https://www.triumf.ca/sites/default/files/PIF-overview.jpg) | ![](https://www.triumf.ca/sites/default/files/PIF-BL1B-protons.jpg) ![](https://www.triumf.ca/sites/default/files/PIF-BL1B-neutrons.jpg) | ![](https://www.triumf.ca/sites/default/files/PIF-BL2C-protons.jpg) |
Facility overview and general layout | BL1B standard proton and neutron test configurations | BL2C standard proton test configuration |
Beamline 1B - details |
![](/sites/default/files/user-3035/BL1B_dosimetry.jpg) | ![](/sites/default/files/user-3035/BL1B_beampipe.jpg) | ![](/sites/default/files/user-3035/BL1B_test_standard.JPG) |
BL1B dosimetry, diagnostics and controls | BL1B beampipe entry point into testing room | BL1B standard testing area. Steel-brick collimator and scintillator detectors in the forefront. The beam comes from behind the collimator. |
Beamline 2C - details |
![](/sites/default/files/user-3035/BL2C_controls.JPG) | ![](/sites/default/files/user-3035/BL2C_example_test.jpg) | |
BL2C dosimetry, diagnostics and controls | Electronic board testing in the BL2C standard testing location. Collimators and monitors are visible along the beamline. The beam comes from the wall at the back of the image. | |
Moveable test tableThis table can be controlled remotely and the total travel distance is 30 cm both vertically and horizontally |
![](/sites/default/files/user-3035/XYstage_plate.JPG) | ![](/sites/default/files/user-3035/XYstage_arm.JPG) | |
Moveable test table with the plate attachment on BL2C. Parts can be put or clamped on the plate. | Moveable test table with the arm attachment on BL2C. Parts can be suspended from the arm, held by clamps or zip ties. | |